# content
5.8       TOWER

Figure 5‑12: TOWER

A TOWER is a 49.25in (1.251m) wide, 45.0in (1.143m) deep, and 78.25in (1.988m) tall structure made up of the TOWER WALL, TOWER BASE, UPRIGHTS, RUNGS and supporting structures. There is 1 TOWER per ALLIANCE. A TOWER is integrated into each ALLIANCE WALL between DRIVER STATION 2 and DRIVER STATION 3.

The TOWER BASE is a 39.0in (99.06cm) wide by 45.18in (1.148m) deep plate that sits on the floor and extends from the TOWER WALL. The TOWER BASE is powder-coated steel with hook fastener underneath. The edges of the TOWER BASE are approximately 0.2in (0.5cm) to 0.3in (0.8cm) tall.

The UPRIGHTS are two 72.1in (1.831m) tall, 1.5in (3.81cm) thick, 3.5in (8.89cm) deep sheet metal box frames that extend vertically up from the TOWER BASE. The distance between each UPRIGHT is 32.25in (81.92cm).

The UPRIGHTS hold three horizontal RUNGS made up of 1-1/4in Sch 40 (1.66in (4.216cm) OD) pipe. Each RUNG is centered between the UPRIGHT and extend 5.875in (14.92cm) from the outer face of the UPRIGHT on either side. The center of the LOW RUNG is located 27.0in (68.58cm) from the floor. The center of the MID RUNG is located 45.0in (114.3cm) from the floor. The center of the HIGH RUNG is 63.0in (1.6m) from the floor. The RUNGS are 18.0in (45.72cm) apart center to center.

The UPRIGHTS and RUNGS are powder-coated red or blue.

Each TOWER has additional supporting structures extending from the UPRIGHT to the TOWER WALL between approximately 28.40in (72.14cm) and 43.38in (1.102m) off the floor.

Figure 5‑13: TOWER Dimensions

# contentMap.en
5.8       TOWER

Figure 5‑12: TOWER

A TOWER is a 49.25in (1.251m) wide, 45.0in (1.143m) deep, and 78.25in (1.988m) tall structure made up of the TOWER WALL, TOWER BASE, UPRIGHTS, RUNGS and supporting structures. There is 1 TOWER per ALLIANCE. A TOWER is integrated into each ALLIANCE WALL between DRIVER STATION 2 and DRIVER STATION 3.

The TOWER BASE is a 39.0in (99.06cm) wide by 45.18in (1.148m) deep plate that sits on the floor and extends from the TOWER WALL. The TOWER BASE is powder-coated steel with hook fastener underneath. The edges of the TOWER BASE are approximately 0.2in (0.5cm) to 0.3in (0.8cm) tall.

The UPRIGHTS are two 72.1in (1.831m) tall, 1.5in (3.81cm) thick, 3.5in (8.89cm) deep sheet metal box frames that extend vertically up from the TOWER BASE. The distance between each UPRIGHT is 32.25in (81.92cm).

The UPRIGHTS hold three horizontal RUNGS made up of 1-1/4in Sch 40 (1.66in (4.216cm) OD) pipe. Each RUNG is centered between the UPRIGHT and extend 5.875in (14.92cm) from the outer face of the UPRIGHT on either side. The center of the LOW RUNG is located 27.0in (68.58cm) from the floor. The center of the MID RUNG is located 45.0in (114.3cm) from the floor. The center of the HIGH RUNG is 63.0in (1.6m) from the floor. The RUNGS are 18.0in (45.72cm) apart center to center.

The UPRIGHTS and RUNGS are powder-coated red or blue.

Each TOWER has additional supporting structures extending from the UPRIGHT to the TOWER WALL between approximately 28.40in (72.14cm) and 43.38in (1.102m) off the floor.

Figure 5‑13: TOWER Dimensions