# content
R406       *Fill BUMPER corners. Corner joints between BUMPERS must be filled with uncompressed padding material extending at least 2.25in (5.72cm) from the corner with no gaps or voids. Examples of implementation are shown in Figure 8‑10.

Figure 8‑10 Uncompressed corner padding

Separate bumper segments meeting at a miter in the corner are not considered to “fill” the corner due to the cloth covering and do not meet the requirements of this rule.

# contentMap.en
R406       *Fill BUMPER corners. Corner joints between BUMPERS must be filled with uncompressed padding material extending at least 2.25in (5.72cm) from the corner with no gaps or voids. Examples of implementation are shown in Figure 8‑10.

Figure 8‑10 Uncompressed corner padding

Separate bumper segments meeting at a miter in the corner are not considered to “fill” the corner due to the cloth covering and do not meet the requirements of this rule.