# content
R609       *Connect main power safely. The following devices shall be connected with 6 AWG (7 SWG or 16 mm2) copper wire or larger as shown in Figure 8‑8:

A.      1 ROBOT battery,

B.      a single pair of Anderson Power Products (or APP) 2-pole SB type connectors,

C.      the 1 main 120-Amp (120A) surface mount circuit breaker (Cooper Bussman P/N CB185-120, CB185F-120, CB285-120 CB285F-120, CB285120F or Optifuse P/N 153120, 253120), and

D.      the 1 power distribution device (CTR Electronics Power Distribution Panel, PDP or PDP 2.0, P/N am-2856, 217-4244, 14-806880, 24-806880 or REV Robotics Power Distribution Hub, PDH, P/N REV-11-1850)

No additional devices or modifications shall be permitted with the following exceptions:

E.      Monitoring circuitry permitted by R625.

F.      SB-50 to SB-120 adapters, provided they have been presented for Inspection

G.     Termination of wires with appropriate cable lugs

Figure 8‑8 Electrical connection diagram

“SB type” refers to SB type only (e.g. SB-50, SB-120, etc.), not SBS or any other part type beginning with SB. All batteries supplied by FIRST (such as Spare Parts and international batteries) will have a red or pink SB50 connector installed which may not be removed.

The pink connectors included in the KOP mate with the red SB50 connector.

# contentMap.en
R609       *Connect main power safely. The following devices shall be connected with 6 AWG (7 SWG or 16 mm2) copper wire or larger as shown in Figure 8‑8:

A.      1 ROBOT battery,

B.      a single pair of Anderson Power Products (or APP) 2-pole SB type connectors,

C.      the 1 main 120-Amp (120A) surface mount circuit breaker (Cooper Bussman P/N CB185-120, CB185F-120, CB285-120 CB285F-120, CB285120F or Optifuse P/N 153120, 253120), and

D.      the 1 power distribution device (CTR Electronics Power Distribution Panel, PDP or PDP 2.0, P/N am-2856, 217-4244, 14-806880, 24-806880 or REV Robotics Power Distribution Hub, PDH, P/N REV-11-1850)

No additional devices or modifications shall be permitted with the following exceptions:

E.      Monitoring circuitry permitted by R625.

F.      SB-50 to SB-120 adapters, provided they have been presented for Inspection

G.     Termination of wires with appropriate cable lugs

Figure 8‑8 Electrical connection diagram

“SB type” refers to SB type only (e.g. SB-50, SB-120, etc.), not SBS or any other part type beginning with SB. All batteries supplied by FIRST (such as Spare Parts and international batteries) will have a red or pink SB50 connector installed which may not be removed.

The pink connectors included in the KOP mate with the red SB50 connector.