# content
R707       *Configure devices for your team number. The ROBOT CONTROLLER, DRIVER STATION, and any spares used must be configured/named to correspond to the correct team number as follows:

A.      ROBOT CONTROLLER should be named <team number>-RC (e.g., 12345-RC),

B.      DRIVER STATION should be named <team number>-DS (e.g., 12345-DS), and

C.      If a spare ROBOT CONTROLLER or DRIVER STATION is configured, a letter designator may be added <team number>-<letter>-RC/DS (e.g., 12345-A-DS, 12345-B-DS)

See the DRIVER STATION Instructions and ROBOT CONTROLLER Instructions for a detailed procedure for updating DRIVER STATION and ROBOT CONTROLLER names.

# contentMap.en
R707       *Configure devices for your team number. The ROBOT CONTROLLER, DRIVER STATION, and any spares used must be configured/named to correspond to the correct team number as follows:

A.      ROBOT CONTROLLER should be named <team number>-RC (e.g., 12345-RC),

B.      DRIVER STATION should be named <team number>-DS (e.g., 12345-DS), and

C.      If a spare ROBOT CONTROLLER or DRIVER STATION is configured, a letter designator may be added <team number>-<letter>-RC/DS (e.g., 12345-A-DS, 12345-B-DS)

See the DRIVER STATION Instructions and ROBOT CONTROLLER Instructions for a detailed procedure for updating DRIVER STATION and ROBOT CONTROLLER names.