FRCTools
Heads up!
You are viewing a rule from the 2023 manual. Click here to see the latest version.

R902       *The operator console must have a visible display. The Operator Console, the set of Components and Mechanisms used by the Drivers and/or Human PlayerS to relay commands to the Robot, must include a graphic display to present the Driver Station Software diagnostic information. It must be positioned within the Operator Console so that the screen display can be clearly seen during inspection and in a Match.

Similar Rules

Rule R904
R904       *Operator console physical requirements. The Operator Console must not
Rule R906
R906       *No unsafe operator consoles. Operator Consoles shall not be made using hazardous materials, be unsafe, cause an unsafe condition, or interfere with other drive teams or the operation of other Robots.
Rule R901
R901       *Use the specified Driver Station Software. The Driver Station Software provided by National Instruments (install instructions found here) is the only application permitted to specify and communicate the operating mode (i.e. AUTO/TELEOP) and operating state (Enable/Disable) to the Robot. The Driver Station Software must be version 23.1 or newer.
Rule H402
H402       *Disconnect or set down controllers. Prior to the start of the Match, any control devices worn or held by Human Players and/or Drivers must be disconnected from the Operator Console.