R703       *Use specific Ethernet port for roboRIO. The roboRIO Ethernet port must be connected to either

R901       *Use the specified Driver Station Software. The Driver Station Software provided by National Instruments (install instructions found here) is the only application permitted to specify and communicate the operating mode (i.e. AUTO/TELEOP) and operating state (Enable/Disable) to the ROBOT. The Driver Station Software must be version 25.0 or newer.

R701       *Control the ROBOT with a roboRIO. ROBOTS must be controlled via 1 programmable NI roboRIO or roboRIO 2.0 (P/N am3000 or am3000a, both versions referred to throughout this manual as “roboRIO”), with image version 2025_v2.0 or later.

R702       *Communicate with the ROBOT with the specified radio. 1 Vivid Hosting wireless bridge (P/N: VH-109), that has been configured with the appropriate encryption key for your team number at each event, is the only permitted device for communicating to and from the ROBOT during the MATCH. Events held in China and Chinese Taipei are the exceptions to this rule and must use an OpenMesh (P/N: OM5P-AN or OM5P-AC) radio.