R603       *Charge batteries with safe connectors. Any battery charger used to charge a ROBOT battery must have a corresponding polarized connector installed.

R606       *Batteries should be securely mounted. The ROBOT battery must be secured such that it will not dislodge during vigorous ROBOT interaction including if the ROBOT is turned over or placed in any arbitrary orientation. Batteries must be mounted such that they are protected from direct contact with other ROBOTS or any sharp edges.

R605       *Batteries are not ballast. No batteries other than those allowed per R601 and R602 are allowed on the ROBOT, whether or not they are being used to supply power.

R601       *Battery limit – everyone has the same main ROBOT power. The only legal source of electrical energy for the ROBOT control system and actuation during the competition, the ROBOT battery, must be 1 and only 1 approved 12V NiMH main battery. The ROBOT main battery must have a COTS equivalent in-line 20A ATM mini blade fuse installed. Installed connectors may be replaced with other popular connectors such as Anderson Powerpole, XT30, or any connector with a comparable power rating. The only allowed ROBOT main power battery packs are: