FRCTools
Heads up!
You are viewing a rule from the 2023 manual. Click here to see the latest version.

R705       *Configure devices for your team number. The roboRIO, Driver Station Software, and wireless bridge must be configured to correspond to the correct team number, per the procedures defined in the FIRST Robotics Competition Control System documentation.

Similar Rules

Rule R703
R703       *Use specific Ethernet port for roboRIO. The roboRIO Ethernet port must be connected to the wireless bridge port labeled “18-24 vPOE” (either directly, via a network switch, via an RPM, or via a CAT5 Ethernet pigtail).
Rule R702
R702       *Communicate with the Robot with the specified radio. 1 OpenMesh wireless bridge (P/N: OM5P-AN or OM5P-AC), that has been configured with the appropriate encryption key for your team number at each event, is the only permitted device for communicating to and from the Robot during the Match.
Rule R905
R905       *Field wireless only. Other than the system provided by the Field, no other form of wireless communications shall be used to communicate to, from, or within the Operator Console.
Rule R707
R707       *No other wireless allowed. No form of wireless communication shall be used to communicate to, from, or within the Robot, except those required per R702, R706, and tags used for location detection systems if provided by the event.