FRCTools
Heads up!
You are viewing a rule from the 2023 manual. Click here to see the latest version.

R703       *Use specific Ethernet port for roboRIO. The roboRIO Ethernet port must be connected to the wireless bridge port labeled “18-24 vPOE” (either directly, via a network switch, via an RPM, or via a CAT5 Ethernet pigtail).

Note: Placing a switch between the roboRIO and radio may impede the ability for Field Staff to troubleshoot roboRIO connection issues on the Field. Teams may be asked to connect directly between the radio and the roboRIO as part of troubleshooting efforts.

Similar Rules

Rule R903
R903       *Connect FMS Ethernet directly to the operator console. Devices hosting the Driver Station Software must only interface with the FMS via the Ethernet cable provided at the Driver Station (e.g. not through a switch). Teams may connect the FMS Ethernet cable to the device running the Driver Station Software directly via an Ethernet pigtail, or with a single-port Ethernet converter (e.g. docking station, USB-Ethernet converter, Thunderbolt-Ethernet converter, etc.). The Ethernet port on the Operator Console must be easily and quickly accessible.
Rule R702
R702       *Communicate with the Robot with the specified radio. 1 OpenMesh wireless bridge (P/N: OM5P-AN or OM5P-AC), that has been configured with the appropriate encryption key for your team number at each event, is the only permitted device for communicating to and from the Robot during the Match.
Rule R701
R701       *Control the robot with a roboRIO. Robots must be controlled via 1 programmable NI roboRIO or roboRIO 2.0 (P/N am3000 or am3000a, both versions referred to throughout this manual as “roboRIO”), with image version 2023_v3.1 or later.
Rule R708
R708       *Wireless bridge must be visible. The wireless bridge must be mounted on the Robot such that the diagnostic lights are visible to FIELD STAFF.