R703       *Use specific Ethernet port for roboRIO. The roboRIO Ethernet port must be connected to the wireless bridge port labeled “18-24 vPOE” (either directly, via a network switch, via an RPM, or via a CAT5 Ethernet pigtail).

R709       *Robots must have a signal light. Robots must use at least 1, but no more than 2, diagnostic Robot Signal Light (RSL) (P/N 855PB-B12ME522 and/or am-3583).

R707       *No other wireless allowed. No form of wireless communication shall be used to communicate to, from, or within the Robot, except those required per R702, R706, and tags used for location detection systems if provided by the event.

R702       *Communicate with the Robot with the specified radio. 1 OpenMesh wireless bridge (P/N: OM5P-AN or OM5P-AC), that has been configured with the appropriate encryption key for your team number at each event, is the only permitted device for communicating to and from the Robot during the Match.