FRCTools
Heads up!
You are viewing a rule from the 2023 manual. Click here to see the latest version.

R706       *Don’t bypass the arena network. All signals must originate from the Operator Console and be transmitted to the Robot via the Arena Ethernet network.

Similar Rules

Rule R702
R702       *Communicate with the Robot with the specified radio. 1 OpenMesh wireless bridge (P/N: OM5P-AN or OM5P-AC), that has been configured with the appropriate encryption key for your team number at each event, is the only permitted device for communicating to and from the Robot during the Match.
Rule R707
R707       *No other wireless allowed. No form of wireless communication shall be used to communicate to, from, or within the Robot, except those required per R702, R706, and tags used for location detection systems if provided by the event.
Rule R703
R703       *Use specific Ethernet port for roboRIO. The roboRIO Ethernet port must be connected to the wireless bridge port labeled “18-24 vPOE” (either directly, via a network switch, via an RPM, or via a CAT5 Ethernet pigtail).
Rule R701
R701       *Control the robot with a roboRIO. Robots must be controlled via 1 programmable NI roboRIO or roboRIO 2.0 (P/N am3000 or am3000a, both versions referred to throughout this manual as “roboRIO”), with image version 2023_v3.1 or later.