FRCTools

R710       *Use assigned Wi-Fi bands and/or channels if requested. Teams may be asked by the Event Director to use a specific Wi-Fi frequency band or channel on the day of competition. If requested, teams are required to do so. Teams may work with the FTA or wireless technical advisor (WTA) to find an alternate frequency band or channel if the suggested band/channel is deemed problematic by the FTA or WTA.

Similar Rules

Rule R709
R709       *No other wireless allowed. No form of wireless communication shall be used to communicate to, from, or within the ROBOT, except those specified per R706 and R708.
Rule R708
R708       *Do not interfere with the ROBOT networks. During a MATCH, all communications signals must originate from only the ROBOT CONTROLLER device or the DRIVER STATION device using the ROBOT CONTROLLER Wi-Fi network. No other devices may attempt to connect to, interfere with, or alter the ROBOT CONTROLLER Wi-Fi network.
Rule R706
R706       *Bandwidth is restricted. Software with access to the ROBOT network must limit the amount of data being streamed (i.e., continuous transmission of data) over Wi-Fi. Software may only stream robot control data, debugging data, and telemetry to and from the ROBOT. No continuous video stream is allowed.
Rule E301
E301        *No wireless communication. Teams may not set up their own Wi-Fi (802.11a/b/g/n/ac/ax/be) wireless communication (e.g., access points or ad-hoc networks), Bluetooth, or any other communications systems using 2.4GHz or 5GHz wireless in the venue.