FRCTools

R718       *Configure Android devices appropriately. ROBOT CONTROLLER and DRIVER STATION Android devices (smartphones, REV Control Hub, REV Driver Hub) must additionally be configured in the following ways:

A.      REV Control Hub users must change the Wi-Fi password to a non-default password,

B.      smartphone users must enable Airplane Mode,

C.      on ROBOT CONTROLLER and DRIVER STATION Android devices, Wi-Fi must be enabled and Bluetooth must be disabled, and

D.      on smartphones and REV Driver Hub, remove all remembered Wi-Fi Direct Groups and Wi-Fi connections, leaving only the ROBOT CONTROLLER Wi-Fi connection.

Similar Rules

Rule R707
R707       *Configure devices for your team number. The ROBOT CONTROLLER, DRIVER STATION, and any spares used must be configured/named to correspond to the correct team number as follows:
Rule R701
R701       *Control the ROBOT with a single ROBOT CONTROLLER. ROBOTS must be controlled via 1 programmable ROBOT CONTROLLER. The ROBOT CONTROLLER is the only source of control for the ROBOT actuators and must be comprised of: 
Rule R705
R705       *Smartphone android devices used as a ROBOT CONTROLLER must connect to the REV Expansion Hub using USB. If used as a ROBOT CONTROLLER, the smartphone android device must be connected via its integrated micro-USB port to a REV Expansion Hub either:
Rule R901
R901       *Use only a specified DRIVER STATION device. The OPERATOR CONSOLE may only have one approved android-based DRIVER STATION device connected and powered on. The OPERATOR CONSOLE must have at least one of the following: