R610
*1 breaker/fuse per circuit.
All circuits, with the exceptions of those listed in R615 and R617, must connect to, and have power sourced
solely by, a single protected 12VDC WAGO connector pair of the
Similar Rules
Rule R620
R620
*Only use specified fuses in PDP/PDP2.0/PDH.
The only fuses permitted for use in the PDP/PDP2.0/PDH are automotive blade
fuses with the following values:
Rule R621
R621
*Protect circuits with
appropriate circuit breakers. Each branch circuit must be protected by 1
and only 1 circuit breaker or fuse on the PDP/PDP2.0/PDH per Table 8‑3. No other electrical load can be connected
to the breaker or fuse supplying this circuit with the exception of devices
downstream of a Kraken X60 Powerpole adapter board (WCP-1380, RF-4003).
Rule R618
R618
*Use PDP/PDP2.0/PDH terminals as
designed. Only 1 wire shall be connected to each terminal on the PDP/PDP2.0/PDH.
Rule R619
R619
*Only use specified circuit breakers
in PDP/PDP2.0/PDH. The only circuit breakers permitted for use in the
PDP/PDP2.0/PDH are:
built by grahamsh
Buy me a hot chocolate
Buy me a hot chocolate