FRCTools Search
Heads up!
You are viewing a rule from the 2023 manual. Click here to see the latest version.
  1. Home
  2. 2023
  3. Rule G104

G104       *Keep your Bumpers together. Bumpers may not fail such that a segment completely detaches, any corner (as defined in R401) of a Robot’s Frame Perimeter is exposed, or the team number or Alliance color are indeterminate.

Violation: Disabled.

Similar Rules

Rule G103
G103       *Keep your Bumpers low. Bumpers must be in the Bumper Zone (see R402) during the Match.
Rule G102
G102       *Robots, stay on the Field during the Match. Robots and anything they control, e.g. GAME PIECES, may not contact anything outside the Field except for Momentary contact inside the PORTALS.
Rule R405
R405       *Bumpers indicate your alliance. Each Robot must be able to display red or blue Bumpers to reflect their Alliance color, as assigned in the Match schedule distributed at the event (as described in Section 11.1 MATCH Schedules). Bumper markings visible when installed on the Robot, other than the following, are prohibited:
Rule R102
R102       *Starting Configuration – no overhang. In the Starting Configuration (the physical configuration in which a Robot starts a Match), no part of the Robot shall extend outside the vertical projection of the Frame Perimeter, with the exception of its Bumpers and minor protrusions such as bolt heads, fastener ends, rivets, cable ties, etc.
Support Development

Built by Graham • © 2026