FRCTools

G303       *ROBOTS on the FIELD must come ready to play a MATCH. A ROBOT must meet all following MATCH-start requirements:

A.      does not pose a hazard to humans, FIELD elements, or other ROBOTS.

B.      has passed inspection, i.e., it is compliant with all ROBOT rules.

C.      if modified after initial Inspection, it is compliant with I305.

D.      is the only team-provided item left in the FIELD.

E.      ROBOT SIGNS must indicate the correct ALLIANCE color (see R402).

F.      ROBOT must be motionless following completion of OpMode initialization.

If a ROBOT is DISABLED prior to the start of the MATCH, the DRIVE TEAM may not remove the ROBOT from the FIELD without permission from the Head REFEREE or the FTA.

For assessment of many of the items listed above, the Head REFEREE is likely to consult with the LRI.

Violation: The MATCH will not start until all requirements are met if there is a quick remedy. DISABLED if it is not a quick remedy, and, at the discretion of the Head REFEREE, ROBOT must be re-inspected. RED CARD if a team’s ROBOT is not compliant with part B or C participates.

Similar Rules

Rule G304
G304       *ROBOTS must be set up correctly on the FIELD. A ROBOT must be positioned on the FIELD such that it meets all of the following requirements:  
Rule I303
I303          *Get inspected before playing a Qualification/Playoff MATCH. A team is only permitted to participate in a Qualification or Playoff MATCH and receive RANKING POINTS if their ROBOT has passed an initial, complete inspection. INSPECTORS are available to help, but teams are expected to ensure their ROBOT and other supporting equipment are within the rules at all times when competing.
Rule G103
G101       *Humans, stay off the FIELD during the MATCH. Other than actions explicitly allowed in section 11.4.6 Human, a DRIVE TEAM member may only enter the FIELD during the following times:
Rule G301
G301       *Be prompt. A DRIVE TEAM member may not cause significant delays to the start of their MATCH. Causing a significant delay requires both of the following to be true: